Home | About JCVJS | Editorial board | Ahead of print | Current Issue | Archives | Instructions | Subscribe | Advertise | Contact us |   Login 
Journal of Craniovertebral Junction and Spine
Search Articles   
    
Advanced search   
 


 
   Table of Contents  
ORIGINAL ARTICLE
Year : 2020  |  Volume : 11  |  Issue : 3  |  Page : 180-185  

Reconsidering the tectorial membrane: A morphological study


School of Health Sciences, The University of Newcastle, Callaghan, NSW, Australia

Date of Submission19-Jun-2020
Date of Acceptance03-Jul-2020
Date of Web Publication14-Aug-2020

Correspondence Address:
Peter Grant Osmotherly
School of Health Sciences, The University of Newcastle, Callaghan, NSW 2308
Australia
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/jcvjs.JCVJS_91_20

Rights and Permissions
   Abstract 


Background: Published descriptions of the tectorial membrane have been inconsistent. Descriptions vary from a simple ligamentous band extending between the axis and occiput to a more complex layered structure composed of bands of fibers. The purpose of this study was to examine and document the macrostructure of the tectorial membrane.
Materials and Methods: The tectorial membrane was examined by fine dissection in 11 formalin-fixed human adult cadavers. Detailed descriptions of the macrostructure and attachments were recorded.
Results: Each tectorial membrane examined consisted of two distinct layers. The superficial layer was composed variably of three or four bands. Its fibers extend caudally over multiple spinal levels, becoming continuous with the posterior longitudinal ligament. The deeper layer routinely consisted of three bands, each being firmly adherent to the posterior aspect of the body of the second cervical vertebra. Attachments of fibers from both layers extended beyond the foramen magnum to create a semicircular attachment onto the base of the skull.
Conclusions: The tectorial membrane has a more complex structure than has been described to date in standard anatomical texts. The existence of a layered and banded composition may have implications for understanding its function and for the clinical assessment of this structure.

Keywords: Axis, cervical atlas, craniocervical anatomy, ligament, tectorial membrane


How to cite this article:
Osmotherly PG, Rivett DA. Reconsidering the tectorial membrane: A morphological study. J Craniovert Jun Spine 2020;11:180-5

How to cite this URL:
Osmotherly PG, Rivett DA. Reconsidering the tectorial membrane: A morphological study. J Craniovert Jun Spine [serial online] 2020 [cited 2020 Sep 20];11:180-5. Available from: http://www.jcvjs.com/text.asp?2020/11/3/180/291920




   Introduction Top


The ligamentous structures of the craniovertebral region are vital in ensuring the stability of the craniovertebral junction, preventing subluxation and dislocation.[1],[2] Instabilities of this region have been associated with inflammatory disorders such as rheumatoid arthritis or seronegative spondyloarthropathies,[3],[4] infection of the pharyngeal region,[5],[6],[7] congenital malformation,[8],[9] or trauma.[10],[11] A detailed understanding of the structures comprising this complex is essential for clinicians dealing with patients who have sustained injury to the upper cervical spine and for neurosurgeons encountering these structures during procedures where transcervical or transoral approaches may be used to access the craniovertebral region.[12],[13],[14]

The tectorial membrane is arguably the least explored of the passive stabilizing structures of the craniovertebral region. Most descriptions of the tectorial membrane portray a broad ligamentous band of tissue running between two points of bony insertion.[15],[16],[17],[18] However, early reports of dissections of the craniovertebral region have been published describing the tectorial membrane as a multilayered structure consisting of distinct bands.

In an extensive examination of 85 cadavers, Cave described the tectorial membrane as having superficial and deep portions, with the deep portion consisting of distinct medial and lateral components.[19] Fick draws a clear distinction between the two layers of the tectorial membrane.[20] He described the superficial layer as consisting of fibers continuous with the posterior longitudinal ligament, whereas the deeper layer was composed of three bands of shorter fibers running between the adjacent vertebrae. Poirier et al. also described the tectorial membrane as having three distinct bundles, one central and two lateral.[21] However, these authors considered that only the deeper layer truly comprised the tectorial membrane with the posterior layer belonging to the “communal posterior vertebral ligament.”

The existence of layers and bands in the tectorial membrane has more recently been challenged.[22] Following the dissection of 13 formalin-fixed cadavers, Tubbs et al. reported that they were unable to find any distinct parts to the tectorial membrane, either as deep or lateral components. In view of the inconsistencies in published descriptions of the tectorial membrane, the following study was undertaken to determine the gross morphology and variations of this structure.


   Materials and Methods Top


Eleven cervical spine and head specimens were obtained from embalmed human adult cadavers aged between 69 and 91 years (mean age = 84.1 years). No specimen was involved in trauma as a cause of death.

Cervical spine columns were removed from each cadaver at the level of the C6–C7 intervertebral disc and zygoapophyseal joints. Each specimen was divested of all muscle tissues. The skull was sectioned through the occipital bone, and the brain tissue was removed. In accordance with methods previously described by Dvorak et al.,[23],[24] a posterior wedge of approximately 140° was cut from the occipital bone. Anteriorly, the bone was sectioned by a midline cut in the coronal plane. The posterior arch of the atlas and the posterior elements C2–C6 were resected. Brainstem, spinal cord, and dura were removed to expose the tectorial membrane. Using a dissecting microscope, the tectorial membrane was examined by fine dissection. Each structure was systematically dissected by resecting its collagen fibers in small bundles. As the bundles were stripped and removed, the orientation, location, and attachment sites were recorded descriptively, photographically, and in sketches. Layers were resected to reveal deep layers which were then resected in a similar manner. Relationships of the tectorial membrane were noted. Measurement of the distance of attachment into the occiput was obtained using calipers.


   Results Top


The tectorial membrane was defined by an intimate and often adherent association with the dura posteriorly and by fibers extending superiorly to a curved attachment onto the occiput. Each tectorial membrane comprised two distinct layers of fibers with differing patterns of attachment.

The first (superficial) layer consisted of fibers running longitudinally in variably three (nine specimens) or four (two specimens) bands. These bands emerged from a central layer of fibers which appeared to be an upward projection from the posterior longitudinal ligament. The majority of the banded arrangement was situated within the superior component of this structure and remained visible from the point of division to the occipital insertion. Where a three-band arrangement was present, the central band assumed a “fan” shape as it ascended into the basiocciput expanding on its upward course to its semicircular attachment. The two lateral bands arched outward alongside the central band, constituting the outer aspects of the semicircle [Figure 1]. In the two specimens with a four-band arrangement, this spread of fibers in the bands was less obvious, appearing to follow a straighter line toward the points of attachment.
Figure 1: (a) The superficial layer of the tectorial membrane viewed from the posterior aspect and (b) with margins of the individual bands highlighted

Click here to view


Superiorly, fibers attached from 5 to 20 mm (mean 10.6 mm, standard deviation [SD] 4.6 mm) past the foramen magnum onto the anterior internal surface of the occiput. Inferiorly, fibers of all bands spanned over several segments, blending into the posterior longitudinal ligament overlying levels from C2 to C6. Some attachments were evident on some specimens onto the posterior aspects of the vertebral bodies of the axis and C3. Present in most specimens was a communicating band extending to a deeper layer. In the majority of specimens, this occurred via a central band of dense connective tissue over the level of the axis. Less frequently, small bands of dense connective tissue could be discerned diving to the deeper layer from lateral bands.

The second (deeper) layer consisted of three clearly discernible bands of longitudinally running fibers in all specimens [Figure 2]. This layer passed over the atlas in each specimen with minimal or no attachment to it as it traversed toward its attachment onto the basiocciput. Inferiorly, each of the three bands consisted of a broad projection arising from strong attachment directly onto the posterior aspect of the vertebral body of the axis. Each of the bands remained separate along their course such that the left lateral band attached distinctly to the left side of the posterior aspect of the vertebra, the right band arising from the right side of the posterior aspect of the vertebra, and the central band attaching in a broad area centrally.
Figure 2: (a) The deep layer of the tectorial membrane viewed from the posterior aspect and (b) with margins of the central and lateral bands highlighted

Click here to view


As it ascended, the central band assumed a “fan” shape, broadening as it passed over the atlas. As the band crossed the level of the odontoid process, the fibers angled and traveled anteriorly, broadening anterolaterally to extend beyond the foramen magnum and create a semicircular attachment onto the internal surface of the basiocciput, with fibers attaching from 8 to 22 mm anterior to the foramen magnum (mean 13.2 mm, SD 4.9 mm).

The lateral bands ascended partially covered by the central “fan” such that the medial portion of the lateral bands lay beneath the lateral portions of the central band. Following removal of the central band, the geometry of the lateral bands could be more clearly discerned [Figure 3]. Each lateral band ascended along the posterolateral aspect of the axis. At the level of the upper one-third of the odontoid process, the fibers diverged such that each lateral band arced both medially and laterally. Medially, the fibers from each side converged and formed an arch over the tip of the odontoid process. Laterally, the fibers continued to their attachment onto the lateral aspect of the basiocciput. The lateral attachment extended to encompass the internal occipital surface around the jugular foramen.
Figure 3: (a) The deep lateral bands of the tectorial membrane viewed from the posterior aspect and (b) with the margins of the bands highlighted. The central band has been removed to show the medial and lateral paths of the cranial portion of the structure

Click here to view


While the lateral bands in the majority of specimens could be seen to pass over the medial aspects of the atlanto-occipital and lateral atlantoaxial joints, two specimens displayed identifiable attachments of some fibers onto the medial aspects of the atlanto-occipital joints. Although the tectorial membrane is generally mobile over the atlas, three specimens were observed to provide some, although not extensive, direct attachment onto the medial aspect of the lateral mass of the atlas from the lateral bands of the deep layer of the tectorial membrane.


   Discussion Top


The notion that the tectorial membrane is simply a broad layer of tissue suspended between two points of bony adherence is clearly incorrect. These dissections demonstrate that the tectorial membrane is a multilayered structure composed of longitudinally running fibers. Each specimen examined was composed of two distinct layers of dense tissue. The fibers comprising each layer gathered into clear bands. Typically, a three-band arrangement was present in each layer, although a four-band arrangement was an observed variant in the superficial layer. The presence of a banded structure suggests that the tissue may be capable of resisting forces from differing directions corresponding to the longitudinal axes of the bands themselves. This description of the tectorial membrane as a structure composed of superficial and deep layers with distinct elements within each layer bears a strong similarity to descriptions published in the early part of the 20th century,[19],[20],[21] and is a departure from the explanations provided in currently accepted texts and atlases of anatomy.

The tectorial membrane has frequently been described as an upward extension of the posterior longitudinal ligament.[15],[25],[26],[27],[28] Our results suggest that the superficial layer of the tectorial membrane is continuous with the posterior longitudinal ligament, but the deeper layer has no connection with this structure inferiorly. Specimens in this study frequently contained numerous fibers which were observed to be continuous over several segments. These fibers were observed to blend into the posterior longitudinal ligament between the levels of the third and sixth cervical vertebrae. Poirier et al. provided a similar description of the relationship between the layers of the tectorial membrane and the posterior longitudinal ligament.[21] The conclusion of these authors was that only the deep layer should be recognized as the tectorial membrane, with the superficial layer considered being part of the posterior longitudinal ligament. While it cannot be disputed that the fibers of the superficial layer of the tectorial membrane are continuous with the posterior longitudinal ligament, the marked differences between the tectorial membrane and the posterior longitudinal ligament in fiber orientation and attachment make considering them as one anatomical entity difficult. The posterior longitudinal ligament in the adult cervical spine has been demonstrated to consist of three distinct layers. The fibers of the deeper two layers span only one segment each in attaching vertebra to vertebra, whereas the superficial band contains central fibers passing longitudinally, which span a variable number of segments and lateral extensions passing inferolaterally at each level to attach at the base of the pedicle one or two vertebral segments below their origin.[29] This contrasts with the observed distribution of fibers in the superficial layer of the tectorial membrane. The findings from the current dissection series indicate that the fibers generally ascend centrally. However, rather than maintaining a distinctly longitudinal orientation, they diverge to form a “fanshaped” arrangement which continues toward its attachment onto the occiput. No significant central bands of fibers were observed attaching unisegmentally onto the atlas. Extensive attachment between the atlas and axis would not be expected given the independence of movement of the atlas with respect to the axis to permit a paradox motion between these adjacent segments.[30] At the level overlying the atlas, lateral components are evident. These pass superolaterally to a broad attachment onto the basiocciput, opposite to the fiber direction described for the lateral elements of the posterior longitudinal ligament.[29]

The inferior attachments of the tectorial membrane have been described as the posterior surface of the vertebral body of the axis,[18],[31],[32] the posterior longitudinal ligament,[33] and the dorsal surface of the odontoid process.[9] In accepting that the superficial layer is indeed a component of the tectorial membrane rather than the posterior longitudinal ligament, the current findings support the first two of these descriptions. The deeper layer has an extensive and strong attachment onto the posterior aspect of the vertebral body of the axis from both its central and lateral components. There was, however, no indication in any specimen of any attachment onto the posterior surface of the odontoid process.

Fick described an attachment of a cluster of fibers extending superolaterally from the tectorial membrane to the inner surface of the atlas, providing strong stabilization to the atlantoaxial joint.[20] The existence of an extensive attachment onto the atlas was not supported by our findings. Attachments onto the atlas were not consistently present and were of insufficient magnitude to be ascribed any functional significance.

The occipital attachments of the tectorial membrane have variously been described in textbooks and published journal articles as the anterior edge of the foramen magnum,[15],[26],[27],[34],[35] the clivus,[32] or the base of the skull on the upper surface of the occipital bone.[16],[18],[22],[27],[31],[33],[36] In each specimen examined in this series, the occipital attachment occurred beyond the foramen magnum. The attachments were diffuse and extensive. Lateral attachments onto the occiput frequently extended further than the hypoglossal canal, contradicting the statements of Romanes.[25] As previously indicated by Tubbs et al., attachment around and even lateral to the jugular foramen was common to significant proportions of fibers originating in the lateral bands.[22]

Both Cave[19] and Fick[20] provide descriptions of the lateral portions of the tectorial membrane, contributing to the medial aspects of the atlanto-occipital joints and the lateral atlantoaxial joints. Only two specimens in this series were noted to have attachments onto the atlanto-occipital joints. No specimen was observed to contribute to the lateral atlanto-axial joints. These findings indicate that attachments into these joints are inconsistent. When these connections are present, they are not considered to be of sufficient magnitude to be an important component in the stabilization of the medial aspects of the atlanto-occipital joints. These findings also differentiate the lateral components of the tectorial membrane from the accessory atlanto-axial ligaments which have been described as passing superolaterally from the body of the axis to substantially attach to the posterior aspect of the lateral mass of the atlas and the lateral atlanto-axial joints before terminating on the occipital bone.[16],[25],[37],[38] While some authors have considered the accessory atlanto-axial joint to be a lateral extension of the tectorial membrane,[38] the differing course of the fibers, particularly as they approach their superior attachment, and the lack of demonstrated substantial attachment to the atlas and lateral atlanto-axial joints suggest these to be entirely separate structures.

The longitudinal orientation of the fibers of the tectorial membrane passing over the odontoid process and continuing anteriorly would support its previously described function as a limiting structure during craniocervical flexion[26],[39] while accommodating vertical translation of the atlas upon the axis resulting from the biconvex nature of the articulation. The curved nature of the structure may suggest that the tectorial membrane potentially plays a role in limiting craniocervical axial rotation. As the structure passes over the odontoid process, it angles anteriorly toward its insertion onto the internal surface of the occiput. This places both layers of the tectorial membrane into a more horizontal plane. The fibers of the superficial layer and the central band of the deeper layer diverge and arc laterally toward their broad semicircular insertion. The lateral bands of the deeper layer arc both medially and laterally. This potentially places all fibers in a position to resist rotation of the occiput with respect to the axis in either direction. These observations are consistent with the report of a previous biomechanical study where changes in the range of craniocervical rotation were recorded before and after transection of the tectorial membrane.[31] However, any role of the tectorial membrane in limiting craniovertebral rotation based on descriptive anatomical observation remains speculative in the absence of specific investigation of any potential role through well-designed, experimental biomechanical analysis to appropriately examine whether such a limiting function exists.


   Conclusions Top


The tectorial membrane is a complex and substantial structure containing a far greater tissue volume than the deeper ligaments of the craniocervical complex. Clinical assessment of the structures of the craniovertebral region is predicated on an understanding of their morphology. By enhancing knowledge of the structure of the tectorial membrane, an improved understanding of the potential contribution to instability created by injury to this structure might be achieved.

Financial support and sponsorship

Nil.

Conflicts of interest

There are no conflicts of interest.



 
   References Top

1.
Edwards RJ, Britz GW, Johnston FG. Fatal instability following “odontoid sparing” transoral decompression of a periodontoid pseudotumour. J Neurol Neurosurg Psychiatry 2002;73:756-8.  Back to cited text no. 1
    
2.
Levine AM, Edwards CC. Traumatic lesions of the occipitoatlantoaxial complex. Clin Orthop Relat Res 1989;239:53-68.  Back to cited text no. 2
    
3.
Boszcyk A, Boszcyk B, Putz R, Benjamin M, Milz S. Expression of a wide range of fibrocartilage molecules at the entheses of the alar ligaments – Possible antigenic targets for rheumatoid arthritis? Rheumatol 2003;30:1420-5.  Back to cited text no. 3
    
4.
Yochum TR, Rowe LJ. Arthritides of the upper cervical complex. In: Glasgow EF, Twomey LT, Scull ER, Kleynhans AM, Idczak RM, editors. Aspects of Manipulative Therapy. 2nd ed. Edinburgh: Churchill Livingstone; 1985.  Back to cited text no. 4
    
5.
Locke GR, Gardner JI, Van Epps EF. Atlas-dens interval (ADI) in children: A survey based on 200 normal cervical spines. Am J Roentgenol Radium Ther Nucl Med 1966;97:135-40.  Back to cited text no. 5
    
6.
Parker DA, Selwyn P, Bradley PJ. Subluxation of the atlanto-axial joint. Br J Oral Maxillofac Surg 1985;23:275-8.  Back to cited text no. 6
    
7.
Shapiro R, Youngberg AS, Rothman SL. The differential diagnosis of traumatic lesions of the occipito-atlanto-axial segment. Radiol Clin North Am 1973;11:505-26.  Back to cited text no. 7
    
8.
Hensinger RN. Osseous anomalies of the craniovertebral junction. Spine (Phila Pa 1976) 1986;11:323-33.  Back to cited text no. 8
    
9.
Wiesel S, Kraus D, Rothman RH. Atlanto-occipital hypermobility. Orthop Clin North Am 1978;9:969-72.  Back to cited text no. 9
    
10.
Swinkels R, Beeton K, Alltree J. Pathogenesis of upper cervical instability. Man Ther 1996;1:127-32.  Back to cited text no. 10
    
11.
Wilberger JE, Maroon JC. Occult posttraumatic cervical ligamentous instability. J Spinal Disord 1990;3:156-61.  Back to cited text no. 11
    
12.
Lenz R, Moore GD, Panchani PN, Dilandro AC, Battaglia F, Tubbs RS, et al. The transverse occipital ligament: An anatomic, histologic, and radiographic study. Spine J 2012;12:596-602.  Back to cited text no. 12
    
13.
Lesoin F, Jomin M, Pellerin P, Pruvo JP, Carini S, Servato R, et al. Transclival transcervical approach to the upper cervical spine and clivus. Acta Neurochir 1986;80:100-4.  Back to cited text no. 13
    
14.
Lesoin F, Pellerin P, Villette L, Jomin M. Anterior approach and osteosynthesis for recent fractures of the pedicles of the axis. Neurosurgery 1986;19:374-7.  Back to cited text no. 14
    
15.
Last RJ. Anatomy Regional and Applied. 6th ed. Edinburgh: Churchill Livingstone; 1978.  Back to cited text no. 15
    
16.
Wood Jones F, editor. Buchanan's Manual of Anatomy. 8th ed. London: Bailliere Tindall and Cox; 1953.  Back to cited text no. 16
    
17.
Grant JCB, Basmajian JV. Grant's Method of Anatomy. 7th ed. Baltimore: The Williams and Wilkins Company; 1965.  Back to cited text no. 17
    
18.
Moore KL, Dalley AF. Clinically Oriented Anatomy. 5th ed. Philadelphia: Lippincott Williams and Wilkins; 2006.  Back to cited text no. 18
    
19.
Cave AJ. Anatomical notes on the occipito-atlanto-axial articulations. J Anat 1933-34;68:416-23.  Back to cited text no. 19
    
20.
Fick R. Hundbuch der Anatomie und Mechanik der Gelenkeed. Jena: Verlag von Gustav Fischer; 1904.  Back to cited text no. 20
    
21.
Poirier PJ, Nicolas A, Charpy A. Traite d'Anatotomie Humaine. 3rd ed. Paris: Massan; 1911.  Back to cited text no. 21
    
22.
Tubbs RS, Kelly DR, Humphrey ER, Chua GD, Shoja MM, Salter EG, et al. The tectorial membrane: Anatomical, biomechanical, and histological analysis. Clin Anat 2007;20:382-6.  Back to cited text no. 22
    
23.
Dvorak J, Panjabi MM. Functional anatomy of the alar ligaments. Spine (Phila Pa 1976) 1987;12:183-9.  Back to cited text no. 23
    
24.
Dvorak J, Schneider E, Saldinger P, Rahn B. Biomechanics of the craniocervical region: The alar and transverse ligaments. J Orthop Res 1988;6:452-61.  Back to cited text no. 24
    
25.
Romanes GJ, editor. Cunningham's Textbook of Anatomy. 11th ed. London: Oxford University Press; 1972.  Back to cited text no. 25
    
26.
White AAI, Panjabi MM. Clinical Biomechanics of the Spine. 2nd ed. Philadelphia: J.B. Lippincott Company; 1990.  Back to cited text no. 26
    
27.
Woodburne RT, Burkel WE. Essentials of Human Anatomy. 8th ed. New York: Oxford University Press; 1988.  Back to cited text no. 27
    
28.
Zuckerman S. A New System of Anatomy. London: Oxford University Press; 1961.  Back to cited text no. 28
    
29.
Mercer S, Bogduk N. The ligaments and annulus fibrosis of human adult cervical intervertebral discs. Spine 1999;24:619-28.  Back to cited text no. 29
    
30.
Penning L. Normal movements of the cervical spine. AJR Am J Roentgenol 1978;130:317-26.  Back to cited text no. 30
    
31.
Oda T, Panjabi MM, Crisco JJ 3rd, Bueff HU, Grob D, Dvorak J. Role of tectorial membrane in the stability of the upper cervical spine. Clin Biomech (Bristol, Avon) 1992;7:201-7.  Back to cited text no. 31
    
32.
Werne S. Factors limiting the range of movement of the craniovertebral joints. Acta Orthop Scand Suppl 1957;23:38-62.  Back to cited text no. 32
    
33.
Gardner E, Gray DJ, O'Rahilly R. Anatomy. A Regional Study of Human Structure. 4th ed. Philadelphia: W.B. Saunders Company; 1975.  Back to cited text no. 33
    
34.
Driscoll DR. Anatomical and biomechanical characteristics of upper cervical ligamentous structures: A review. J Manipulative Physiol Ther 1987;10:107-10.  Back to cited text no. 34
    
35.
Mercer S. Structure and function of the bones and joints of the cervical spine. In: Oatis CA, editor. Kinesiology. The Mechanics and Pathomechanics of Human Movement. Philadelphia: Lippincott Williams and Wilkins; 2004. p. 451-69.  Back to cited text no. 35
    
36.
Hollinshead WH. Anatomy for Surgeons: The Back and Limbs. 2nd ed., Vol. 3. New York: Hoeber Medical Division, Harper and Row Publishers; 1969.  Back to cited text no. 36
    
37.
Testut L, Latarjet A. Traite d'Anatomie Humaine. 8th ed. Paris: Doin; 1928.  Back to cited text no. 37
    
38.
Tubbs RS, Salter EG, Oakes WJ. The accessory atlantoaxial ligament. Neurosurgery 2004;55:400-2.  Back to cited text no. 38
    
39.
Penning L. Normal kinematics of the cervical spine. In: Giles LG, Singer KP, editors. Clinical Anatomy and Management of Cervical Spine Pain. Oxford: Butterworth Heinemann; 1998. p. 53-70.  Back to cited text no. 39
    


    Figures

  [Figure 1], [Figure 2], [Figure 3]



 

Top
  
 
  Search
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Access Statistics
    Email Alert *
    Add to My List *
* Registration required (free)  

 
  In this article
    Abstract
   Introduction
    Materials and Me...
   Results
   Discussion
   Conclusions
    References
    Article Figures

 Article Access Statistics
    Viewed115    
    Printed5    
    Emailed0    
    PDF Downloaded0    
    Comments [Add]    

Recommend this journal